Removal and installation of a lantern
1. Turn off the ignition and disconnect the battery (see chapter 5).
2. Using a screwdriver, press out the fixing spring (see resist. illustration), remove the light assembly from the rear bumper/tailgate (depending on the model).
3. Disconnect the license plate light wiring connector.
4. Installation is made in the reverse order of removal.
Lamp replacement
5. Remove the license plate light (see above).
6. Turn the lamp socket counterclockwise (see resist. illustration) and remove it together with the lamp from the lamp housing. Replace lamp.
7. Installation is carried out in the reverse order.
Visitor comments