Removal and installation turn signal repeaters (Opel Astra H)

1. Before starting work, set the rotary switch for the outdoor lighting modes to the "0" position (see Chapter "Controls and operating techniques", Section 17) and turn off the ignition. Disconnect the battery (see Chapter 5).

2. Using a plastic wedge, pry up the turn signal repeater on the right side, press it as shown in the accompanying illustration and remove it from the wing.



3. Turn the lamp socket (see illustration 18.2) counterclockwise and remove it together with the lamp.

Note: The supply wiring does not have a plug connector and is not detachable from the lamp holder.

4. Remove the lamp from the socket.

5. Installation is performed in the reverse order of removal. When installing on the wing, the repeater is installed in the hole first with the left side, and then it is necessary to press on its right side until the lock clicks. Check the reliability of the repeater fastening and its proper functioning.