2. Remove the windshield wiper arm (see Section 9).
3. Remove the tailgate trim (see Chapter 11).
4. Disconnect the electrical wiring connector (see accompanying illustration) unscrew the 3 mounting bolts of the electric motor, remove it and carefully remove the electric motor from the tailgate.
[Original posted on the website: OpelBook.ru]
5. Installation is performed in the reverse order of removal. Make sure that the electric motor drive is in the appropriate position, if necessary, connect the electric motor to the connector (connect the battery) and set the required position. After finishing the work, check the adjustment of the wiper lever (see Section 9).
Visitor comments