Windshield
1. Remove the fairing grille (see chapter 11).
2. Press the latch (see resist. illustration) on the reverse side of the grate and remove the nozzle from the seat. Disconnect the hose from the nozzle.
3. Installation is carried out in the reverse order.
4. If necessary, adjust the direction of the washer fluid jet on the windshield, for which insert a needle into the corresponding nozzle of the nozzle (service stations use the HAZET 4850-1 tool) and aim the nozzle at the desired point.
Rear glass
Hatchback and Astra GTC models
5. Remove the upholstery of the tailgate (see chapter 11).
6. Remove high level brake light (see Section 20).
7. On Hatchback models, simply remove the nozzle from the brake light assembly, on Astra GTC models, you must first squeeze out 2 clamps.
8. Installation is carried out in the reverse order.
Station wagon and Zafira models
9. Using a plastic wedge or other suitable tool, pry the nozzle and remove it from the seat of the tailgate (see resist. illustration). Disconnect the supply hose from the nozzle.
10. Installation is carried out in the reverse order.
Headlight washers (Astra models)
11. Remove the front bumper cover (see chapter 11).
12. Disconnect the headlight washer hose from the back of the trim.
13. Using a screwdriver, press down the headlight washer cover from the front bumper cover (see resist. illustration).
14. Press the latch (see resist. illustration) and remove the headlight washer from the lining.
15. Press the latches (see resist. illustration) and remove the headlight washer cover.
16. Installation is carried out in the reverse order.
Visitor comments