Warning! Before performing the operation, be sure to read the section «Safety measures for the maintenance and repair of the engine management system».
Execution sequence
1. We prepare the car for work (see «Preparing the car for maintenance and repair»),
2. Remove the lower decorative overlay of the instrument panel (see «Brake light switch - replacement and adjustment»).
3. Using a thin slotted screwdriver, pry off the latch...
...and disconnect the wiring harness block.
4. Using a 10 mm socket wrench with an extension, unscrew the three nuts securing the pedal and remove it.
5. Install the parts in reverse order.
Visitor comments