Versions with manual transmission
1. Remove the front floor console.
2. Remove the lower trim of the dashboard.
3. Remove the outer facing cover of the dashboard.
4. To remove a lateral decorative molding of a windscreen.
5. To remove facings of thresholds of forward and back doors of the car.
6. To turn away two fastenings of the vacuum amplifier of brakes.
7. To remove the main brake cylinder.
8. Remove the steering column.
9. Remove seven nuts (1) pedal assembly.
Note. Tightening torque: 22 Nm.
10. Unhook the hood release lever, disconnect the dashboard extension, lift and fix approximately 40 mm on the left side of the car.
11. Disconnect electrical connectors.
12. Unhook the brake pedal from the brake booster rod by pulling in the opposite direction from it.
13. Remove the pedal assembly (2).
14. Installation is made in an order, the return to removal.
Note. Install a new latch on the brake pedal lever.
Versions with automatic transmission
1. Remove the front floor console.
2. Remove the lower trim of the dashboard.
3. Remove the outer facing cover of the dashboard.
4. To remove a lateral decorative molding of a windscreen.
5. To remove facings of thresholds of forward and back doors of the car.
6. To turn away two fastenings of the vacuum amplifier of brakes.
7. Remove the steering column.
8. Remove seven nuts (1) pedal assembly.
Note. Tightening torque: 22 Nm.
9. Unhook the hood release lever, disconnect the dashboard extension, lift and fix approximately 40 mm on the left side of the car.
10. Disconnect electrical connectors.
11. Unhook the brake pedal from the brake booster rod by pulling in the opposite direction from it.
12. Remove the pedal assembly (2).
13. Installation is made in an order, the return to removal.
Note. Install a new latch on the brake pedal lever.
Visitor comments