Vectra cars
Removal
The glued moldings can be removed from the body after heating with a hair dryer. To do this, heat the molding in parts and peel it off. Be careful not to overheat the paintwork of the body.
Separate the molding and the body using thin wire. To make the work easier, the ends of the wire can be secured to two wooden blocks.
Installation
Clean the surface where the molding meets the body with clean gasoline.
Before gluing, heat the molding and the gluing area to a temperature no higher than 80°C.
Remove the protective strip from the molding and glue the molding.
Visitor comments