Vectra cars
Removal
Remove the radiator grille. To do this, press the retaining strips with a screwdriver and remove the grille.
Disconnect the connectors from the fog lights (if equipped).
For cars with carburetor engines: unscrew the two bolts between the front bumper and the right wheel arch and fold back the mud deflector.
Loosen the screws on the left and right between the front trim and the wheel arch.
Unscrew the two bolts from the side members and pull the front bumper forward.
Installation
Drill holes if necessary (see arrows) for installation of fog lights.
If there are 1 traffic jams (see fig.C8502A) were filmed, insert them.
Using an assistant, slide the front bumper onto the guides and tighten the mounting bolts to the side members.
Raise the mudguard and secure it with screws.
Connect the connectors to the fog lights.
Insert the lower part of the radiator grille into the holes, press from above and snap into place.
Visitor comments