Replacing light bulbs (Opel Vivaro A)

Headlights

Low and high beam

Remove cover 1. Disconnect the plug from the socket. Bend the spring clip 2 and pull out the bulb. Halogen lamp: H4.

Never handle a halogen lamp by the glass, only by the base.

Replace the light bulb; make sure the spring clip, plug and cover are positioned correctly.

Front parking lights

Original source on the website: OPELBOOK.ru

Loosen bulb socket 3 by a quarter of a turn and remove the bulb. Bulb type: W 5 W. Replace the bulb and install the bulb mount.

Direction indicators

Pull spring clip 4 to release turn signal flasher 6.



Remove part 6 from the outside. Loosen bulb holder 5 by a quarter of a turn and pull out the bulb. Bulb type: pear-shaped bulb with bayonet base P21 W.

Side turn signal repeaters

Release the light 2 from the engagement using a slotted screwdriver. Loosen bulb holder 1 by a quarter of a turn and pull out the bulb. Bulb type: W 5 W.

Fog light 3

Additional headlight

If you want to install fog lights or high beam headlights, you must contact an authorized RENAULT service station.

Rear lights

Rear Light Block A

Remove bolts 1.





Tilt the light assembly and release it from the mounting points 2 to access the bulb mount 3. Release the bulb mount from the retainer.

4 - Rear side light and brake light. Pear-shaped bulb with bayonet base P 21/5 W.



5 - Rear direction indicator. Pear-shaped light bulb with bayonet base P 21 W.

Rear Light Block B

Remove bolts 6. Loosen the headlight unit.





7 - Reversing light. Pear-shaped light bulb with bayonet base P 21 W.

8 - Fog light (if any). Pear-shaped light bulb with bayonet base P 21 W.

Third brake light on vehicles with swing doors

Unscrew bolt 1.



Remove the lantern to access bulb 2. Pear-shaped bayonet-type bulb, P 21 W.