Contents: Parking light ⬇ Low beam ⬇ High beam ⬇ Shutdown ⬇ Fog lights ⬇ Fog lights ⬇ Electric headlight range adjustment ⬇

Parking light
To turn on the vehicle lighting, turn lever 1 so that the above-mentioned symbol is opposite mark 2. At the same time, the instrument lighting turns on.

Low beam
To turn on the low beam of the vehicle, turn lever 1 so that the above-mentioned symbol is opposite mark 2. The corresponding indicator light on the instrument panel lights up.
High beam
Pull lever 1 towards the steering wheel from the low beam position. When the high beam is switched on, the corresponding indicator light comes on. Moving the lever towards the steering wheel again switches back to low beam.
Shutdown
Return lever 1 to its original position again.
Warning buzzer "light on"
Opening one door will cause an audible signal if the vehicle lighting is not also switched off when the ignition is switched off (danger of battery discharge).

Fog lights
Place mark 3 on the middle ring of lever 4 opposite the symbol. Depending on the country, fog lights are connected to the parking lights, low beam or high beam. The corresponding signal lamp on the signal and indicator light panel lights up.
Fog lights
Place mark 3 on the middle ring of lever 4 opposite the symbol. Depending on the country, fog lights are connected to the parking lights, low beam or high beam. The corresponding signal lamp on the signal and indicator light panel lights up. If visibility returns to normal, remember to turn off your fog lights to avoid blinding other road users. When the vehicle's normal lighting equipment is switched off, the fog lights, if the vehicle is equipped with them, also go out.
Electric headlight range adjustment

Button 5 can be used to adjust the angle of the headlights. Rotate button 5 to adjust the headlights depending on the load.

Visitor comments