Plastic protective caps of the headlights can be scratched by grains of sand and small stones while driving, as well as when wiping with a dry cloth. The light transmission of scratched caps is greatly reduced, so small scratches must be polished with special polishes.
1. Before polishing, seal the area around the headlight with masking tape so as not to damage the paintwork.
2. We apply polish on a special napkin.
3. Evenly, without strong pressure, in a circular motion, apply polish to the headlight cap.
4. Polish the surface with a special polishing cloth in a circular motion until the polish is completely depleted and the surface shines.
The plastic lenses of the rear lights and side indicators should also not be wiped with a dry cloth. For cleaning, use commercially available detergents and polishes or plain water.
Periodically (at least once a week) it is necessary to check the serviceability of the lamps in all lighting fixtures. Defective lamps should be replaced.
Periodically (at least once a year, can be performed during the next maintenance) lubricate the contacts of the outdoor lighting fixtures with conductive grease. This is especially important for block headlights, since they have powerful low / high beam lamps and poor contact in the block can lead to excessive heating of the connection.
Visitor comments