Lighting and light signaling switch (Opel Omega B2)

Light switch

To turn on the interior lighting the switch handle should be pulled towards you.

To turn on the rear fog light, press the button with the symbol .

Switching from low to high beam

To switch the headlights, move the left steering column switch forward or backward. When moving the switch forward, the high beam is turned on, and when moving it toward the steering wheel, the low beam is turned on.

Light signal

By further moving the switch towards the steering wheel (overcoming resistance) a light signal is emitted.

The light signal can also be given when the direction indicators are on.

Turn indication

When the steering column switch is moved upward from its initial position, the right turn signals are turned on. When the steering column switch is moved downward from its initial position, a left turn signal or lane change is given.

When the steering wheel is returned to the center position, the steering column switch automatically returns to its original position. However, this does not happen during small maneuvers such as changing lanes.

Parking lights

To turn on the parking lights, turn the ignition key to position, the light switch to position 0, and the steering column turn signal switch to the up or down position.

Hazard warning light switch

The emergency light is turned on by pressing the switch .

Pressing it again turns it off. To make it easier to find the hazard warning light switch, its backlight light comes on when the ignition is turned on.



When the hazard warning lights are on, the light flashes in time with the four direction indicators.

Sound signal

To sound the signal, press the keys on knitting needles.