Regardless of the position of the outdoor light switch, you can turn on the main beam headlights briefly by moving the switch lever towards you.
Blocks of fog lamps and direction indicators. In the lower part of the front bumper of cars, blocks of fog lights and direction indicators are installed.
Rear lights. The rear lights consist of two separate parts located in the rear wing and tailgate. The taillights are equipped with brake and side lights, direction indicators, reversing light, fog light.
Rear fog light. The fog lamps in the rear lights are turned on by pressing the lower left button of the exterior lighting control unit only if the headlights are on. When the side light is turned off, the rear fog light turns off automatically.
Direction indicators. Turn signal lamps are installed in the fog lamps, rear and side lamps. Right or left turn indicators are switched on by the left steering column switch.
In alarm mode, the alarm switch turns on all direction indicators. The flashing of the lamps is provided by the alarm relay.
Headlight electric corrector. The cars are equipped with an electric headlight corrector, which allows you to change the direction of the headlight beam in a vertical plane, depending on the load of the car. When installing xenon headlights, cars are equipped with an automatic electric corrector that maintains the optimal direction of the headlight beam when the body vibrates on uneven roads. On request, an adaptive light system can be installed that changes the direction of the dipped beam of headlights in a horizontal plane depending on the angle of rotation of the steering wheel.
License plate lights. The license plate lights are located in the upper part of the rear bumper niche for the license plate.
Helpful Hints
If the headlights suddenly begin to shine dimly, and when the turn signal is turned on, the marker lamp flashes, restore contact «mass» body wires.
Get in the habit of changing bulbs regularly (especially the headlights).
Over time, the bulb of the lamp becomes cloudy, the brightness of the lamp decreases. This process is quite slow, and the driver does not notice the gradual deterioration of road illumination.
Sooner or later, the bulbs in the rear lights burn out. It would seem that what is easier is to take a new light bulb, suitable for the size of the base and voltage, and install it instead of the burned out one. However, please note that the rear lights can use lamps with the same base, but different power - 5W and 21W. And this is an important little thing.
Do not confuse the lamps in places: 5-watt lamps are installed for side lights, 21-watt lamps are installed in direction indicators and brake lights. If you install low-wattage bulbs in your brake lights and turn indicators, other drivers simply won't see your signals in inclement weather. And powerful lamps in «dimensions» will be very disturbing to drivers who are driving behind and annoy them. The same attitude will apply to you.
Visitor comments