You will need: end head «on 7», flat blade screwdriver.
1. Disconnect the wire from the terminal «minus» battery.
2. Remove the front bumper (see Removal and installation of a forward bumper).
Note. It is necessary to remove the front bumper because it completely covers the lower bolt of the headlight to the body.
3. Use a screwdriver to pry the retainer of the wiring harness block..
4.... pull out the latch..
5.... and disconnect the block from the headlight.
6. Turn out the top bolts of fastening of the block headlight to a wing..
7.... and to the radiator frame.
8. Turn out the bottom bolts of fastening of the block headlight to a wing..
9.... and to the radiator frame.
10. Break the filling..
11.... and remove the headlight from the car.
12. Install the parts in the reverse order of removal. Check that the headlights are set correctly and adjust if necessary (see Checking and adjusting the headlights).
Visitor comments