Removing
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Remove the front bumper cover (see «Front bumper - replacement»).
3. Using the TORX T25 key, we unscrew the side bolt of the lower decorative trim of the headlight.
4. With the same key, unscrew the central bolt of the lining and remove it.
5. Using an 8 mm wrench, unscrew the lower bolt of the headlight.
6. Using the same wrench, unscrew the upper mounting bolts, remove the headlight from the body and...
... by bending the latches, disconnect the wiring harness pads from the direction indicator lamp socket 1, the low beam lamp socket 2, the high beam lamp 3 and the electric corrector 4.
Installation
Install the headlight on the car in reverse order. We check and, if necessary, adjust the direction of the beam of light block - headlights (see «Headlight adjustment»).
Visitor comments