Execution sequence
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Disconnect the wiring harness block from the fog lamp.
3. Using the TORX T20 key, we unscrew the lower screw securing the fog lamp to the bumper.
4. With the same key, we unscrew the two screws securing the fog lamp to the bumper (shown on removed bumper).
5. We remove the headlight from the bumper and carefully remove it.
6. Install the fog lamp in reverse order.
7. Check and, if necessary, adjust the direction of the fog lamp beam (see «Headlight adjustment»).
Visitor comments