Note: In the rear wheel arches, protection is installed only in the rear area of the arches.
1. Remove the appropriate wheel.
2. In the front wheel well on Corsa models, unscrew 2 screws and loosen 1 nut (on Meriva models - only 2 screws), remove the expansion rivets (see accompanying illustrations), separate the protection and remove it from the wheel arch in a forward direction.
9.2. Points (indicated by arrows) front mudguard mounts (1) (corsa models)
3. In the rear wheel well on Corsa models, remove 1 screw and loosen 2 nuts (see accompanying illustration), and on Meriva models, also remove the 2 expansion rivets. Remove the protection and take it out of the wheel arch.
9.3. Nuts (indicated by arrows) and the screw (1) for fastening the rear mudguard (corsa C models)
4. Installation is carried out in the reverse order. If necessary, replace lost or damaged expansion rivets with new ones.
Visitor comments