Models Sedan/Hatchback/Station wagon
Removal and installation of a plafond
1. Turn off the ignition and disconnect the battery (see chapter 5).
2. Using a screwdriver, press out the fixing spring (see resist. illustration), remove the license plate light from the rear bumper.
18.2 Removing the license plate light (Sedan / Hatchback / Estate models)
3. Disconnect the license plate light wiring connector.
4. Installation is carried out in the reverse order.
Lamp replacement
5. Remove the license plate light (see above).
6. Turn the lamp socket counterclockwise and remove it, together with the lamp, from the lamp housing (see resist. illustration). Replace lamp.
18.6 To remove the license plate lamp from the lamp assembly, turn the lamp socket counterclockwise (Sedan/Hatchback/Station wagon models)
7. Installation is carried out in the reverse order.
Signum Models
8. Remove 2 screws securing the rear license plate light diffuser (see resist. illustration) and take it off.
18.8 Screws of fastening of a lens of a plafond of illumination of license plate (Signum models)
9. Press the soffit lamp, overcoming the force of the spring terminal and remove it from the ceiling. Replace lamp.
10. Installation is carried out in the reverse order.
Visitor comments