Replacing the fog light bulb (Opel Vectra C)

1. If necessary, raise the vehicle on a lift.

2. Turn the cap on the back of the fog light counterclockwise (see illustration 14.2a) and remove it. Then release the spring clip from the holders, disconnect the wiring connector (see illustration 14.2b) and remove the lamp.





14.2b Wire spring clip (2) and connector (3) for fog lamp wiring

3. Replace the bulb, install the bulb into the socket and, holding it with your finger, secure the wire spring clip into the holders with your other hand. Connect the wiring connector.

4. Replace the lamp cover, lower the vehicle and check that the lamp is functioning properly.

(The source is on the online website: OpelBook)