Examination
The reversing light is switched on by a plunger-type switch, which is screwed into the upper part of the gearbox housing. If the reversing light does not turn on, check the fuse first.
In order to check the operation of the switch, remove the electrical connector from it and, using an ohmmeter, check the resistance between the contacts of the switch with the reverse gear engaged. The resistance must be 0. Otherwise, the switch must be replaced.
Removing
1. To improve access to the switch, remove the battery and battery stand.
2. Disconnect the electrical connector and unscrew the switch (indicated by an arrow) from the gearbox housing.
Installation
Installation is made in sequence, return to removal.
Visitor comments