Cylinder head (Opel Corsa C)

For reference and repair values, see table below.

Note: Cylinder head turning is not permitted.

Reference and repair values

Reference and repair values (cylinder head): 1 – cylinder head height; 2 – mounting height of the valve guide; 3 – valve mounting height; 4 – width of the valve seat in the cylinder head; 5 – valve seat angle in the cylinder head; 6 – valve stem diameter; 7 – valve seat angle on the valve; 8 – valve length; 9 – valve plate diameter

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Checking the article: Kornev Georgy

Share information:

Opel Corsa C: Engine repair

Replacing the poly V-belt (Z10XE, Z10XEP, with air conditioning)
Adjustment of valve timing (Z10XE, Z10XEP, without air conditioning)
Adjustment of valve timing by acting on the camshaft Z10XEP, Z12XE, Z14XEP (from the end of 2004 to 2005)
Checking fuel pressure (Z10XE, Z10XEP, with air conditioning)
Compression pressure test (Z10XE, Z10XEP, with air conditioning)
Checking the valve timing (Z10XE, Z10XEP, without air conditioning)

Removal and installation of the timing case (Z10XE, Z10XEP)
Engine repair (Z10XE, Z10XEP, without air conditioning)
Cylinder block, crank mechanism and piston group

Link to this page in different formats

HTMLTextBB Code

Visitor comments

No comments yet