Removing
1. Open the hood.
2. Remove ignition coils.
3. Unhook the guide (1) engine wiring harness from the cylinder head cover.
4. Detach the guide (2) engine wiring harness.
5. Remove the branch pipe of the forced crankcase ventilation system.
6. Remove 11 bolts (2, 3) and remove the cylinder head cover (1).
Installation
1. Install the cylinder head cover with a new gasket and tighten the 11 mounting bolts to 8 Nm.
2. Install the forced crankcase ventilation pipe.
3. Install the engine wire harness guides (1) And (2) on the cylinder head.
4. Install ignition coils.
5. Close the hood.
Visitor comments