Replacing the accessory drive belt (Opel Insignia A)

Removal

1. Open the hood.

2. If equipped, remove the power steering pump drive belt.

3. Raise and secure the vehicle.

4. Remove the front engine compartment splash guard.

5. Loosen the drive belt tensioner by turning it counterclockwise (1) and secure it with the EN-6349 pin (2).



6. Remove the accessory drive belt.

Installation

1. Install the accessory drive belt.

2. Turn the drive belt tensioner counterclockwise (1), remove the locking pin and slowly release the tensioner.

(Material was taken from a resource OpelBook.ru)

3. Install the front engine compartment splash guard.

4. Lower the vehicle.

5. If equipped, install the power steering pump drive belt.

6. Close the hood.