Set the wheels of the car to a straight position. If the working fluid in the hydraulic system has cooled down, the engine should not be started. You can check and cold oil.
The steering hydraulic reservoir is located at the rear in the engine compartment. Check the level using the dipstick on the cap. Unscrew the cover, wipe the pointer rod with a clean cloth and screw it firmly into place. Unscrew the cap again: the level should be 2 mm below or above the mark «MIN».
If the operating temperature of the liquid is 50°C, measure the level in the same way. The level must be between the marks «MIN» And «MAX».
If the level is above normal, then it is necessary to select the liquid. If it is below normal, check the system for leaks or add working fluid.
Visitor comments