Checking the fluid level should only be done with the engine stopped.
On the vehicles in question, the reservoir of the power steering system is located directly on the steering mechanism, in connection with this, the procedure for checking and adjusting the level of the working fluid is somewhat difficult.
On the Zafira model, to access the tank, you must remove the air inlet pipe (see «Throttle assembly - removal, gasket replacement and installation»).
To check the fluid level, unscrew the reservoir cap of the power steering system counterclockwise. The fluid level must be between the marks on the gauge.
If the level of the working fluid does not reach the lower mark, the fluid must be topped up. Top up with a special fluid designed for the power steering system (see «Reference data») through a funnel with extension (shown on Astra model).
Visitor comments