Attention. For refueling or in the event of a complete replacement of the power steering working fluid, it is necessary to use the specified type of fluid. The use of inappropriate working fluid can cause damage to seals and hoses and lead to leaks.
1. Clean the area around the expansion tank cap,
2. Remove the expansion tank cap.
3. It is necessary to regularly check the level of the power steering fluid:
- Start the engine to warm up the power steering fluid to a temperature of approximately 80°C.
- Turn off the engine.
- Remove the expansion tank cap.
- Check the working fluid level using the dipstick on the cover.
- Make sure that the fluid level corresponds to the HOT/FULL/MAX mark on the dipstick.
(Article published on the website: «Opelbook.ru»)
4. If the fluid level is low, add fluid to the required level.
5. Install the expansion tank cap.
6. If the fluid level was checked after servicing the steering system, it is necessary to bleed the power steering system.
Visitor comments