Contents: Corsa Models (up to 08/2003 year of…⬇ Corsa Models (since 09/2003 year of…⬇ Meriva Models ⬇
Corsa Models (up to 08/2003 year of manufacture)
1. Set the rotary switch for the outdoor lighting modes to position "0" (see Chapter "Controls and operating techniques", Section 17) and turn off the ignition. Disconnect the battery (see Chapter 5).
2. Remove the rear bumper cover (see Chapter 11).
3. Disconnect the fog lamp wiring connector.
4. Turn the fog lamp socket clockwise (see accompanying illustration) and remove it from the lampshade. If replacement is necessary, slightly press the lamp, turn it counterclockwise and remove it from the socket.
18.4. Turn the fog light bulb socket counterclockwise and remove it from the lampshade (corsa models up to 08/2003)
5. Remove the mounting screw (see accompanying illustration) and remove the fog light from the rear bumper trim.
18.5. Screw (indicated by the arrow) fog light mounts (corsa models up to 08/2003)
6. Installation is carried out in the reverse order. Check the proper functioning of the lamp.
Corsa Models (since 09/2003 year of production)
Removal and installation
7. Set the rotary switch for the outdoor lighting modes to the "O" position (see Chapter "Controls and operating techniques", Section 17) and turn off the ignition. Disconnect the battery (see Chapter 5).
8. Remove the rear wheel arch guard from the corresponding side of the vehicle (see Chapter 11).
9. Disconnect the fog light wiring connector and remove the mounting screw (see accompanying illustration) and remove the fog light from the rear bumper trim.
18.9. Electrical wiring connector (2) and screw (1) for fastening the rear fog light (corsa models from 09/2003)
(The source is on the online website: OpelBook.ru)
10. Installation is carried out in reverse order.
Replacing the lamp
11. Remove the rear wheel arch guard from the corresponding side of the vehicle (see Chapter 11) and disconnect the fog light wiring connector (see illustration 18.9).
12. Turn the fog lamp bulb socket (see accompanying illustration) and remove it from the lampshade.
18.12. Rear fog light bulb holder (3) (corsa models from 09/2003)
13. Press the bulb slightly, turn it counterclockwise and remove it from the socket.
14. Installation is performed in the reverse order of removal. Check the proper functioning of the lamp.
Meriva Models
15. Description of removal/installation of fog lamp and replacement of lamps is given in Section 17.
Visitor comments