Removal and installation fog lights (Opel Corsa C)

Note: The following procedure is described using the Corsa C model as an example. Removing/installing fog lights on Meriva models is done in a similar manner, but it will require raising and placing the front of the car on stands.

1. Set the rotary switch for the outdoor lighting modes to the "O" position (see Chapter "Controls and operating techniques", Section 17) and turn off the ignition. Disconnect the battery (see Chapter 5).

2. Disconnect the fog lamp wiring connector, remove the 3 mounting bolts (see accompanying illustration) from the back of the front bumper cover and remove the fog light.

Note: On Meriva models the two mounting boots can only be accessed from below.

3. Installation is carried out in reverse order.