Note. The right suspension support of the power unit is attached with three bolts to the body side member and three bolts to the engine bracket.
1. Remove the air filter and air ducts (see Removal and installation of the air filter, air duct and intake silencer).
2. Place a jack or support under the crankcase.
3. Turn out three bolts of fastening of a support to an arm of the engine …
4.... three bolts of fastening to the side member of the body and remove the support.
5. Turn out three bolts of fastening of an arm of the engine …
6.... and remove the bracket.
7. Inspect the support pad. If there is swelling, cracking of the rubber mass, its delamination from the metal cage, or cracks in the cage, replace the support assembly.
8. Inspect the support bracket. In the presence of cracks or ovality of holes for fastening parts, replace the bracket.
9. Install the right powertrain mount in the reverse order of removal.
Visitor comments