1. Disconnect the wire from the terminal «minus» battery.
2. Remove the air filter (see Removal and installation of the air filter, air duct and intake silencer).
3. Remove the accessory drive belt (see Accessory drive belt replacement).
4. Turn away a nut of fastening of a tip of a power wire and disconnect a wire from an output of the generator.
5. Squeeze the clamp of the voltage regulator harness block..
6.... and disconnect the block from the regulator.
7. Turn out two bolts of fastening of the generator to an arm on the engine …
8.... and remove the generator, lowering it down, under the car.
Note. For clarity, shown with the intake pipe removed.
9. Install the parts in the reverse order of removal.
Visitor comments