1. Raise the front of the car and place it on stands, remove the wheel.
2. Turn away a coupling bolt of a collar of a spherical support.
3. Remove the ball joint from the hub bracket by pressing it out with a pry bar. Remove the hub bracket and disconnect from the suspension arm.
4. Turn away bolts of fastening of the lever to a subframe and remove the lever (see photo). If necessary, press the lever away from the rubber buffers with a pry bar.
5. Press out the rubber bushings and press in new ones (see photo), by lubricating them with soapy water.
6. When installing the bushings, orient them as shown in the photo.
7. Installation of the lever is carried out in the reverse order.
Visitor comments