Attention! When assembling, it is recommended to replace all nuts and bolts of the disassembled joints.
It should be borne in mind that the camber adjustment of the wheels is simultaneously ensured by the bolts of the hub to the suspension strut. Therefore, before unscrewing these bolts, it is necessary to indicate the position of the hub bracket in relation to the rack. After assembling the hub assembly, you should check the wheel alignment in a car service.
1. Raise the front of the car, remove the wheel.
2. Release a nut of a tip of steering draft and press out a tip from the lever of a rotary fist.
3. Remove the wheel hub (see below).
4. Mark the position of the hub bracket in relation to the suspension strut. Remove 2 bolts and 2 nuts and remove the hub bracket.
5. Installation is carried out in the reverse order.
Visitor comments