Attention! The springs are removed separately.
1. Raise the rear of the car and place on stands, remove the wheels.
2. On station wagon models with pneumatic rear suspension height adjustment, remove the rear right light cover in the luggage compartment and bleed air from the system by opening the valve.
3. Raise the suspension by placing a jack under the arm.
4. Turn away the bottom bolt of fastening of the shock-absorber (see photo).
5. Lower the lever without allowing tension on the brake hose.
6. Remove the spring, support cup and top buffer (see photo).
7. Installation is carried out in the reverse order. On models with automatic suspension height adjustment, create a pressure in the pneumatic system of 0.8 atm, then adjust the pressure in accordance with the load.
Visitor comments