Rear suspension springs — removal and installation (Opel Omega B)

Removal

1. Lower the rear of the exhaust system by approximately 300 mm.

2. Disconnect the rear suspension height sensor connector. Mark the position of the sensor arm and disconnect it from the stabilizer bar connecting rod.

3. Disconnect the hydraulic line from the shock absorber if necessary.

4. Loosen and remove the lower shock absorber mounting bolts.

5. Disconnect the ABS sensor connectors.

6. Remove the bolts securing the rear suspension crossmember damper bracket to the body.

7. Lower the final drive, rear suspension crossmember and suspension arm and remove the spring and rubber pads.

Installation

Installation is carried out in the reverse order of removal.