Removing
1. Remove the protective panel from the bottom of the engine.
2. Disconnect the ball joints of the suspension arms from the pivot pins.
3. Disconnect the connecting links from the stabilizer bar.
4. Remove the nuts securing both engine mounts to the cross member and mounting brackets.
5. Remove the engine vibration damper, if necessary.
6. Place a hoist on top of the engine and tension the hoist winch to support the weight of the engine.
7. Mark the installation position of the front suspension cross member.
8. Unscrew the fixing bolts and remove the cross member.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments