Rear suspension shock absorber (Opel Omega B)

Removal

1. Raise the appropriate rear suspension arm to reduce the load on the shock absorber.



2. Remove the carpet or trim panel and remove the upper shock absorber mounting nuts.

3. On models with adjustable rear suspension height, open the valve on the side of the shock absorber and release the pressure. Disconnect the hydraulic line from the shock absorber.



4. Lower the suspension arm and remove the lower mounting bolt.



5. Remove the shock absorber.



6. Inspect the shock absorber for wear or damage.

7. Check the rubber mounting elements.

8. Replace the defective elements.

9. Check the operation of the shock absorber and replace it if necessary.

Installation

Installation is carried out in the reverse order of removal.

[Text copied from a web portal www.OpelBook.ru]