Removing
1. Remove intermediate and back sections of an exhaust system.
2. Remove the handbrake cable balancer.
3. Remove the brake calipers.
4. Remove the ABS sensors.
5. Disconnect the cardan shaft from the final drive flange.
6. Place a thick board under the suspension arms and place a jack under the center of the board.
7. Remove the bolts securing the final drive brackets to the body.
8. Loosen the lower shock absorber mounting bolts.
9. Remove suspension springs and spacers.
10. Loosen the three fixing screws (A) and center bolt (IN) front mounting of the suspension cross member and remove the rear suspension.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments