2. Remove the ashtray with the mounting body (see chapter 11) and remove the cigarette lighter from the socket.
3. Remove the trim (see resist. illustration) cigarette lighter socket from the center console.
28.3 Removing the trim (1) and nests (2) cigarette lighter: 3. Backlight ring; 4. Screwdriver
4. Disunite 2 sockets of an electroconducting of a nest of a lighter.
5. Using a screwdriver (see illustration 28.3) Remove the cigarette lighter socket from the illumination ring, then remove the ring.
6. Use a screwdriver to pry out the latch (see resist. illustration) and separate the bulb holder from the illumination ring. Replace lamp if necessary.
28.6 Socket assembly (2) cigarette lighter: 3. Light ring; 5. Cartridge; 6. Lamp
7. Installation is carried out in the reverse order.
Visitor comments