2. Remove the central and driver's side ventilation nozzles from the instrument panel by inserting a feeler gauge blade into both sides of the nozzle and removing the nozzles from the socket.
3. Remove the light switch.
4. Unscrew the inner and outer screws.
5. Remove the instrument cluster trim.
6. Unscrew the two screws (arrows) and remove the light switch cover. Disconnect the electrical connectors.
7. Unscrew the two screws.
8. Remove the instrument cluster
9. Disconnect the electrical connectors from the rear of the instrument cluster and remove the instrument cluster from the vehicle.
10. Installation is carried out in the reverse order of removal.
[Article published on the website www.OPELBOOK.ru]
Visitor comments