Washer reservoir
Location of reservoir and washer pump
The reservoir and washer pump are located behind the front bumper.
1. Remove the front bumper.
2. Remove the left front wheel arch liner.
3. Place a container under the washer pump.
4. Disconnect the electrical wiring from the top of the washer pump.
5. Remove the hose from the pump and drain the fluid into a container.
6. On models with a headlight washer, disconnect the electrical wiring and hose from the auxiliary pump on the reservoir.
7. Remove the stopper from the tank.
8. Release the electrical wiring from the mounting brackets on the top of the tank.
9. Unscrew the mounting bolt and remove the washer reservoir.
10. Installation is made in sequence, return to removal.
Washer pump
1. Remove the front bumper.
2. Remove the left front wheel arch liner.
3. Place a container under the washer pump.
4. Disconnect the electrical wiring from the top of the pump.
5. Disconnect the hose from the washer pump and drain the fluid into a container.
6. Pull the pump and remove it from the washer reservoir.
7. If necessary, replace the O-ring in the washer reservoir.
8. Installation is made in sequence, return to removal.
Visitor comments