Contents: Removal ⬇ Installation ⬇
The sequence and order of connecting electric motors for vehicles with a lifting rear door and with hinged doors are the same.
Removal
1. Make sure the wiper motor is in the locked stop position.
2. Disconnect the battery.
3. Remove the windshield wiper arms and trim.
4. Disconnect the wiring connector from the wiper motor.
5. Unscrew the three bolts A securing the electric motor (figure 9.84).
Text was copied from the portal (www.opelbook.ru)
Figure 9.84. Unscrew the three bolts A securing the electric motor.
Installation
6. Installation is carried out in the reverse order of removal.

Visitor comments