Removal
1. Unscrew the hub nut, remove the brake disc (figure 6.1).
Figure 6.1. Unscrew the hub nut, remove the brake disc.
2. Disconnect the wheel speed sensor (on vehicles equipped with ABS) (figure 6.2).
Figure 6.2. Disconnect the wheel speed sensor (on vehicles equipped with ABS).
3. Unscrew the nut securing the ball joint of the steering rod end, the nut securing the ball joint of the suspension arm, the nuts of the bolts securing the shock absorber strut to the steering knuckle (figure 6.3).
Figure 6.3. Unscrew the nuts of the bolts securing the shock absorber strut to the steering knuckle.
4. Disconnect the ball joint of the tie rod end, the ball joint of the suspension arm from the steering knuckle. Remove the axle shaft from the hub.
Visitor comments