Cars with a body «sedan»
Removing
1. Unscrew the mounting bolts and remove the retroreflector (see illustration).
2. Unscrew the mounting bolts and wring out the clamps (1-5) and remove the rear bumper, acting together with an assistant (see illustration).
Installing the rear bumper is done in reverse order.
Cars with a body «station wagon»
Removing
3. Remove facing of back wheel arches and remove a retroreflector 1 (see illustration).
4. Unscrew one bolt 2 fastenings on the rail on each side of the bumper (see illustration 5.3).
5. Wring out two clamps 4, having squeezed out their expanding rivets. Clips can be used when installing the bumper later (see illustration 5.3).
Unscrew the six flanged bolts 3, removing the decorative caps from them with a small screwdriver (see illustration 5.3).
7. Remove the rear bumper.
Installation of a back bumper is carried out in sequence, return to removal.
Visitor comments