Do not turn on the regulator if the selected constant speed does not correspond to real road conditions (for example, heavy traffic, a lot of sharp turns on the road, rain or ice).
On models with automatic transmission, the device is activated only in position "D".
I - on with locking
Press: the speed is programmed. The accelerator pedal can be released. Acceleration by adding gas is allowed. After releasing the pedal, the speed will be restored to the programmed value.
I - acceleration with fixation
Short press repeatedly: gradually increase the speed.
Press and hold: continuously increases the speed to the desired value. After releasing, the selected speed is programmed and will be constantly maintained at this level.
0 - off
Short press: the control device is switched off. The car will begin to slowly reduce speed. If the speed drops below 40 km/h, the control device switches off automatically. The automatic switch-off device also operates when the brake pedal or clutch is pressed.
R - turn on the program
Short press at speeds above 40 km/h: restores the speed programmed before the device was turned off.
When the engine is turned off, the set program is reset.
Visitor comments