For this you need:
- fill the tank with fuel, cover the battery with something,
- turn on the ignition,
- using a screwdriver, unscrew the air drain screw of the fuel filter one turn,
- make several slow, even strokes with the manual fuel priming button until clean, air-bubble-free fuel flows from the half-open drain hole,
- screw the screw.
key (12 mm) Loosen the bleed screw on the high pressure fuel pump one turn and also pump a few times with manual priming until fuel flows out of the hole without air bubbles.
Tighten the screw firmly again.
Visitor comments