2. Unscrew the 2 bolts, loosen the fastening nut and remove the protective cover from the generator (see accompanying illustration).
11.2. Screw (2) and nuts (1) for fastening the generator protective cover
3. Remove 3 bolts (see accompanying illustration) and remove the voltage regulator from the generator. Remove and replace the brushes if necessary.
11.3. Voltage regulator (4): 3. Mounting bolts; 5. Generator brushes; 6. Protective cover
4. Installation is carried out in reverse order.
Text copied from an internet website: www.OPELBOOK.ru
Features of the Z13DT engine
5. On these models, it is necessary to move the regulator protective cover in the direction indicated by the arrow (see accompanying illustration), unscrew 3 bolts and remove the regulator.
11.5. Bolts (3) fastening the voltage regulator on the Z13DT engine
Visitor comments