Front suspension - Independent, with MacPherson struts, gas-charged shock absorbers and anti-roll bar
Rear suspension - semi-independent, with torsion beam, trailing arms, coil springs and telescopic shock absorbers
Steering type - Rack and pinion, with electric power steering
Wheels and tires
See Specifications for Chapter «Controls and methods of operation» And Chapter 1.
Wheel alignment
Front camber/tread adjustment
Suspension tuning options | collapse | Overrun |
Corsa-C | -1°10'±45' | 1°35'±1° |
Corsa-C sports equipment | -1°20±45' | 1°30'±1° |
Corsa-C with reinforced suspension for driving on "bad" roads | -0°50±45' | 1°55'±1° |
Corsa-C Eco | -1°25'±45' | 1°40'±1° |
Combo/Combo Tour | -1°05'±45' | 1°25'±1° *' |
Combo with reinforced suspension for driving on "bad" roads | -0°45'±45' | 1°20'±1° |
Meriva: | -0°50±45' | 2°55'±1° |
*) For Combo models with increased payload, this value will be - 1°15'±1". Permissible difference between the right and left sides 1'.
Front wheel alignment:
- Corsa-C: +0°10'±10'
- Corsa Combo: -0°10'±10'
- Meriva: +0°10'±10'
Tightening force of threaded connections, Nm
The upper mounting nuts of the front shock absorber struts - 55
Nut of fastening of the top basic bearing of a shock-absorber rack — 50
Self-locking front strut lower bolts/nuts - 80 Nm + 60°+ 15°
Nuts of fastening of vertical racks of the stabilizer — 65
Bolt of a collar of fastening of a spherical support of the cross-section lever to a rotary fist — 60
Self-locking tie rod nuts - 35
Front wheel hub nuts - 120 Nm - loosen before turning by hand + 20 Nm + 90°.
Bolts of fastening of a spherical support to the cross-section lever — 55
Bolts for fastening the transverse arm to the subframe - 90 Nm + 75°+ 15°
Rear shock absorber top nuts (Corsa C models) — 20
Rear shock absorber bottom bolts (Corsa C models):
- Bolt M10 - 65
- Bolt M14 (cast iron trailing arm models) — 110
Rear shock absorber upper mounting bolts (Corsa Combo and Meriva models) — 90
Rear shock absorber bottom bolts (Corsa Combo and Meriva models) — 110
Rear wheel hub assembly bolts - 50 Nm + 30°+ 15°
Rear wheel hub nuts - 175
Screws of fastening of the module of a driver's front airbag — 8
Steering wheel bolt:
- Corsa C-25
- Meriva — 30
Nuts of fastening of tips of steering drafts to a rotary fist — 35
Tie Rod End Locknuts - 50
Wheel bolts - 110
Visitor comments