1. Disconnect the wire from the terminal «minus» battery.
2. Remove the steering wheel (see Removal and installation of a steering wheel).
3. Remove the steering column cover (see Removal and installation of a casing of a steering column).
4. Squeeze the fastening clips of the turn signal and exterior lighting switch..
5.... take him aside..
6.... and disconnect the wiring harness block.
7. Disconnect the steering column wiper and washer switch in the same way.
8. Remove the driver's airbag slip ring (see Removing and installing the driver's airbag and its contact ring).
9. Turn out the screw of fastening of a connector of understeering switches..
10.... squeeze the latch..
11.... and remove the connector from the steering column.
12. Install the removed parts in the reverse order of removal.
Visitor comments