You will need: keys «on 10», «at 13».
1. Disconnect the wire from the terminal «minus» battery.
2. Remove the front bumper (see Removal and installation of a forward bumper).
3. Squeeze the clamp of the wiring harness block..
4.... and disconnect the block from the sound signal.
5. Turn away a nut of fastening of a sound signal …
6.... and remove the horn.
7. If necessary remove an arm of a sound signal. To do this, unscrew the nut that secures the horn bracket and remove the bracket.
8. Install the new horn in the reverse order of removal.
Visitor comments