2. The filter element is built into the heater air distributor housing. On the models considered in this manual, two types of filter element housings are used: on one, the cover is fastened with two studs, on the other, with two bolts and three latches. Release the fastener and open the cover. Remove the filter element from the housing.
A - Cabin filter version 1
B - Cabin filter version 2
A.
B.
1 - Cover
2 - Mounting studs
Installation is in the reverse order.
If the filter element is marked with an arrow, make sure that it points forward in the vehicle during installation.
Visitor comments